What are the precautions for the operators of the mineral powder briquette machine?

Nowadays, the mineral powder briquette machine is reused in many metallurgical industries, which solves the waste of resources caused by the waste of various metal scraps, slag and lime powder wastes. After years of research and development, the mineral powder briquette machine is very mature, whether it is the supporting equipment or the pressing process, but as a mechanical equipment that requires personnel to operate, the operator’s various qualities have requirements, so in work, what are the precautions for the dome camera operator?

1. Preparation before suppressing work

The operator of the mineral powder briquette machine should be familiar with the process and operating procedures, concentrate on the operation, contact the post in time when encountering problems, and report the situation to the leader, coordinate the handling, and keep track of the production situation and the operation of the machinery and equipment, and start the machine. Before confirming the normal operation of the various parts of the powder briquette machine machine, check whether the pressure of the pressed parts is sufficient, turn the pouring mixer switch to the automatic state, confirm the sampling port, close the water valve, turn on the pouring mixer, and contact the batching operator. In the case of the ratio and mold height, after the slurry has been dropped, observe the slurry temperature and open the steam valve. When the slurry temperature in the mixer reaches 34°C-36°C, close the steam valve.

2. Adjust various parameters

During the pressing process, it is necessary to confirm that all the added raw materials are added in sufficient quantities, and the corresponding pressure, forming and other factors must be controlled before the work can be carried out. And according to the instructions of the leaders on duty, appropriately adjust the suppression parameters and forming model to ensure the smooth operation of the mineral powder briquette machine. Pay attention to the normal use of machinery and equipment and the accurate adjustment of ingredients during operation, make a record of the duty operation, and report the data truthfully.

3. suppression work and end of work

When the pressure of the mineral powder briquette machine reaches the standard, the material can be discharged. Run for 3-5 minutes. When the pressure reaches the standard and the temperature reaches 42-45℃, the material will be discharged. Stir for 20-30 seconds after the material is down for compression. After the compression is completed, close the valve. When the production is completed, the mixer and all auxiliary equipment will be cleaned. After cleaning, all the valves will be closed and the switches will be switched to the stop state.

After the above work process, the point that the operator of the briquette machine machine should pay attention to is to do a good job in the maintenance and maintenance of the mineral powder briquette machine machine. You can’t just use it and ignore its wear. The emergence of wearing parts needs to be discovered in time. If you have a small partner who wants to buy a briquette machine, you can leave a message on our website of Zhengzhou Sionlion Machinery Co., Ltd., or send us an email or inquiry.